Advanced Trouble Shooting Electric Chic Glideboard

 

Motor Reset. To be used if the Glideboard motor is emitting louder sounds than usual

1. Turn off the Glideboard.
2. Place the Glideboard on a flat, level surface keeping the left and right pedals aligned.
3. Press in the power switch for 6 seconds continuously.
4. The signal light should flash 3 times indicating that the procedure is complete.

 

Calibration. To be used when the pedals fall out of alignment

1. Turn on the Glideboard.
2. Place the Glideboard on a flat, level surface keeping the left and right pedals aligned.
3. Press in the power switch for 4 seconds continuously.
4. The signal light should flash 6 times indicating that the procedure is complete.

 

Signal Light Reset. To be used if the signal lights turn red rather than green.

1. Turn on the Glideboard
2. Place the Glideboard on a flat level surface. Keep the left and right pedals level and aligned
3. Press the power switch 6 times
4. The signal light should flash 3 times indicating that the procedure is complete.